Posted by HIDS Direct Ltd on 30th Jan 2014
Please click on the Twitter Logo (stay connected below) and follow us for the latest news, offers and more. Competitions will be added once our followers hit a higher number so retweeting us will of course earn some early brownie points :)
Thank you.
https://www.twitter.com/HIDSDirectLtd
@hidsdirect
1. Remove Male connectors from HID bulb wiring and crimp female types on. Then pass cabling through the back of the and slot into pre-moulder slot.You should now be able to install this into your headlight with the power feed coming from the two connectors on the rear of your HID holder.If you are having [...]
Step 1.Have your products ready to modify.Step 2.Carefully remove the two spade connector wires from the grommetStep 3.Pass both connections and grommet through the square hole in the OEM projector clipStep 4.Slide projector clip flush with base of bulb ready for instillationStep 5.Carefully slide spade connecter wires back into grommet if required.Available from the link [...]
Single Beam Installation Instructions:1. Verify that the HID Conversion Kit includes all components required for the installation (A list of component available below)2. Disconnect the car battery.3. Remove dust cover and factory halogen light bulbs.4. If your vehicle is equipped with headlight dust caps, drill a 1"(24mm) hole to accommodate the wiring harness.5. Remove the [...]
Please be sure to checkout our new canbus Terminator HID kits, these kits are a new arrival and have the latest canbus technology, improved function and have a slim sleek design.Please see the listing for more info (terminator in search bar above).www.hids-direct.co.uk
All prices are in GBP © 2025 HIDS DIRECT Store. All rights Reserved | Sitemap
hids-direct.co.uk, Car Part Hut Ltd, UK Registered 13039569 VAT Number GB 365025020
Registered office 140 LEE LANE BL6 7AF HORWICH GB