HIDS-DIRECT · D-LUMINA LED RANGE
D-Lumina H1 LED CANBUS Bulbs
6000K WHITE · HIGH / LOW BEAM APPLICATIONS · PLUG AND PLAY · 2 PACK
Give your lighting a modern white finish with D-Lumina H1 LED Canbus bulbs. Supplied as a pair, these compact LED replacements combine 6000K white light and an advertised 10,000LM output per pair with integrated Canbus electronics, a non-polarity connection and active fan cooling. Designed for suitable H1 halogen applications, with vehicle-specific fitment checks before installation.
A matching pair. Clear specifications.50W per bulb / 100W per pair · Advertised 10,000LM per pair · 6000K white
H1Bulb Fitment
50WPer Bulb
10,000LMAdvertised Per Pair
6000KWhite Light
CANBUSReady
2 BulbsSupplied As Pair
LED performance
Key Features At A Glance
WHITE LED OUTPUT
6000K White LightAdvertised 10,000LM per pair from a compact automotive LED design.
CANBUS READY
Integrated ElectronicsDesigned to help reduce common bulb warnings and flickering on compatible vehicles.
ACTIVE COOLING
Fan & Copper Heat PipeAluminium construction and a manufacturer-rated 12,000RPM fan help transfer heat away from the LEDs.
Check the H1 lighting positionFor dipped beam or main beam where the vehicle uses H1 bulbs. Each bulb serves one beam function in its installed position.
Design & construction
Explore The H1 LED Features
Upgraded LED Chip Design
- Advertised 10,000LM output per pair
- Compact LED emitter design
- Instant white LED illumination
- Beam pattern depends on headlamp design
Integrated Canbus Electronics
- Built-in decoding system
- Designed to reduce common bulb warnings
- Helps manage flickering and interference
- Some vehicles may need additional decoders
IP68 Rated Protection
- Manufacturer-rated IP68 construction
- Water- and dust-resistant design
- Refit the headlamp dust cap correctly
- Keep electrical connections secure and dry
Straightforward Installation
- Non-polarity electrical connection
- Compact replacement design
- Check access and retaining clips before fitting
- Additional holders may be required on some vehicles
Compact H1 Fitment
- Designed for H1 halogen bulb positions
- Manufacturer diagram shows an 11.5mm blade width
- Diagram shows 40.5mm above the mounting flange
- Check rear fan clearance separately
Dynamic Cooling System
- Manufacturer-rated 12,000RPM fan
- Copper heat pipe for heat transfer
- Aluminium body helps dissipate heat
- Allow ventilation space around the fan
CANBUS compatibility varies by vehicleIntegrated decoding helps reduce common warning messages. Some vehicles may still require an additional decoder or fitting component.
Installation
Non-Polarity Plug And Play Design
Product information
Product Details
⚙Technical Specifications−
| Brand |
D-Lumina |
| Bulb Type |
H1 LED replacement |
| Wattage |
50W per bulb / 100W per pair |
| Advertised Light Output |
10,000LM per pair |
| Colour Temperature |
6000K White |
| Application |
Dipped beam or main beam, depending on the vehicle |
| Canbus |
Integrated decoding electronics; vehicle compatibility varies |
| Connection |
Non-polarity plug and play design |
| Cooling |
Aluminium body, copper heat pipe and 12,000RPM fan (manufacturer specification) |
| Protection Rating |
IP68 (manufacturer specification) |
| Pack Size |
2 bulbs |
| Warranty |
1-Year UK Warranty |
⌕Vehicle Compatibility & Installation−
Suitable for applications that use H1 halogen bulbs. Check the existing bulb type and the lighting position before ordering. These are single-beam bulbs: each bulb serves the dipped beam or main beam position in which it is installed. They do not provide both functions from one bulb.
Check the bulb holder, retaining clip, electrical connection and available space behind the headlamp. The cooling fan must have sufficient clearance and the dust cap must refit securely. Some vehicles may require an additional bulb holder, adapter or Canbus decoder. After fitting, check bulb seating, beam pattern and headlamp alignment.
Not sure whether H1 is correct? Send HIDS-DIRECT your registration number and the lighting position you want to replace. A photo of the existing bulb and holder can help us check the installation requirements.
!CANBUS Information−
CANBUS ReadyBuilt-in electronics are designed to reduce bulb warnings and flickering. Vehicle compatibility varies and an additional decoder may be required.
★Warranty−
1 Year HIDS-DIRECT WarrantySupplied with a 12-month HIDS-DIRECT warranty and UK-based product support.
!Road Use & MOT Information−
Off-road & competition use
Sold for off-road and competition use. No ECE road-use approval has been established for this product. Do not assume that Canbus compatibility or a correct-looking beam pattern makes an LED conversion road legal or MOT compliant. The October 2026 MOT change applies to ECE-approved LED replacement bulbs in compatible halogen headlamps, with the required approval sticker.
?Frequently Asked Questions−
Will these H1 bulbs work on dipped and main beam?
Yes, where the vehicle uses H1 bulbs in the relevant position. Each H1 bulb serves one beam function; it does not switch between dipped and main beam like a dual-beam H4 bulb.
Will these bulbs cause dashboard warnings?
The integrated Canbus electronics are designed to reduce common bulb warnings and flickering. Compatibility varies by vehicle, and an additional decoder may be required.
Are these H1 LED bulbs plug and play?
They have a non-polarity plug and play design for compatible H1 applications. Check bulb holders, retaining clips, electrical connections and rear fan clearance before installation. Some vehicles need additional fitting parts.
How bright are these H1 LED bulbs?
The advertised light output is 10,000 lumens per pair with a 6000K white colour temperature. Actual illumination and beam pattern depend on the headlamp and installation.
Are these H1 LED bulbs approved for UK road use?
No ECE road-use approval has been established for this product, so it is sold for off-road and competition use. The October 2026 MOT change for approved LED replacements does not establish approval for these bulbs.
Can HIDS-DIRECT help check the fitment?
Yes. Send your registration number and the lighting position you want to replace. A photo of the existing bulb and holder can help check the fitting requirements.
UK Stock & DispatchAutomotive lighting from HIDS-DIRECT.
Fitment GuidanceUse our Find My Bulb app to check the bulb type for your vehicle and lighting position.
1 Year WarrantyUK-based support and 12-month warranty protection.
D-Lumina H1 LED CANBUS Bulbs
50W per bulb · Advertised 10,000LM per pair · 6000K white · 2 pack