null

Categories

Loader  Loading... Please wait...

Blog

Twitter account launched!

Please click on the Twitter Logo (stay connected below) and follow us for the latest news, offers and more. Competitions will be added once our followers hit a higher number so retweeting us will of course earn some early brownie points :)Thank you.https://www.twitter.com/HIDSDirectLtd@hidsdirect

Read More »


Golf Mk5 Holder Help

1. Remove Male connectors from HID bulb wiring and crimp female types on. Then pass cabling through the back of the and slot into pre-moulder slot.You should now be able to install this into your headlight with the power feed coming from the two connectors on the rear of your HID holder.If you are having [...]

Read More »


H15 Bulb Cover Installation

1. Disconnect battery before installation. Remove waterproof lid.  2. Hold the base of H15 bulb, turn anti clockwise till unlocked   3. Remove H15 halogen bulb   4. Pin 1 & Pin 2  5. Holding bulb with connection plug facing down, slide super white tube onto H15 bulbs 6. Placing Pin.1 and Pin.2 next to top and right wedge [...]

Read More »


Fitting OEM Retaining Clips to your aftermarket HID kit

Step 1.Have your products ready to modify.Step 2.Carefully remove the two spade connector wires from the grommetStep 3.Pass both connections and grommet through the square hole in the OEM projector clipStep 4.Slide projector clip flush with base of bulb ready for instillationStep 5.Carefully slide spade connecter wires back into grommet if required.Available from the link [...]

Read More »


Projector Kit Installation (scan)

Page 1Page 2www.hids-direct.co.uk

Read More »


How to install Mtec Hybrid Wiper blades (Instructions)

Available from this link:http://www.hids-direct.co.uk/categories/mtec-bulbs...

Read More »


Single Beam HID Installation Guide

Single Beam Installation Instructions:1. Verify that the HID Conversion Kit includes all components required for the installation (A list of component available below)2. Disconnect the car battery.3. Remove dust cover and factory halogen light bulbs.4. If your vehicle is equipped with headlight dust caps, drill a 1"(24mm) hole to accommodate the wiring harness.5. Remove the [...]

Read More »


Bixenon Wiring Diagram (Battery)

Bi-Xenon Installation Instructions:Battery Wiring Diagram1. Verify that the HID Conversion Kit you received have all the component needed for the installation (A list of component available below)2. Clean all connectors and wipe the HID bulbs and connectors with rubbing alcohol3. Install the HID bulbs into the headlight housing4. Connect the HID bulbs to the ballast [...]

Read More »


We're Osram Authorised Stockists!

We are now an official stockist of Osram products! To find your local provider please click on the logo belowVisit: www.hids-direct.co.uk for the full range of Osram bulbs!

Read More »


Installation Guides at HIDS Direct Ltd

Please note installation guides are now available under 'Installation Help' at the bottom of each page on our website (next to news)We aim to have all our guides available in the next few weeks however if the current content has no relevance you can still give us a call or email and one of our [...]

Read More »