Posted on 9th Jun 2025
Installing new LED car headlight bulbs can give you better visibility at night and in poor weather conditions. But even a small mistake during installation can affect how well they work — or worse, create safety issues on the road. Here are five common errors that you would want to avoid before you get started:
Incorrect wiring or loose connections can lead to flickering headlights—or worse, prevent them from turning on at all. Always double-check that the connectors match your vehicle, confirm the polarity, and use the right adapters, especially if your car uses a CAN system. This helps avoid both lighting issues and dashboard errors.
You know it too well: driving at night, you encounter an oncoming car whose headlights blind you because they were not adjusted properly. You can check if your low and high beams are properly aligned by checking your lights on a wall at night. The light should be pointing straight ahead, with a slight downward angle during the low beams and pointing a bit higher during the high beams.
If LED lights aren’t aligned properly, it can block ventilation in the headlight assembly. This traps heat and leads to dimming. To avoid this, install all fans and heat sinks correctly, and check for any obstructions after installation.
Avoid using LED car headlight bulbs with the wrong wattage or ones that aren’t compatible with your vehicle. Always choose LEDs that match your car and have the correct wattage, typically between 35W and 55W.
Each region has specific laws for LED car headlight bulbs, and it’s important to follow them. Some brightness levels are illegal as they can affect road safety and distract other drivers. Always check if your LEDs comply with local regulations.
Ready to upgrade to LED car headlight bulbs? Browse through our products today!
All prices are in DKK © 2025 HIDS DIRECT Store. All rights Reserved | Sitemap
hids-direct.co.uk, Car Part Hut Ltd, UK Registered 13039569 VAT Number GB 365025020
Registered office 140 LEE LANE BL6 7AF HORWICH GB