NHK® M4 Max Pro G5 Bi-LED 3.0" Projector Lens - 5500K, 12V, 60W/70W, RHD (Pair)

NHK® M4 Max Pro G5 Bi-LED 3.0" Projector Lens - 5500K, 12V, 60W/70W, RHD (Pair)

The NHK® M4 Max Pro G5 Bi-LED 3.0" projector lens is an upgraded high-performance retrofit projector designed for strong low beam and high beam output in one compact unit. Built with a clear 3.0" glass lens, integrated driver system, and RHD beam pattern, it is designed for modern projector retrofit upgrades where beam sharpness, width, and reliability matter.

With 12V operation, 60W low beam, 70W high beam, 5500K pure white light, and G5 mounting compatibility, the M4 Max Pro offers a strong upgrade over older or lower-spec projector systems. Supplied as a set of 2 pieces.

Key highlights at a glance

• 3.0" clear glass lens for sharp output and colourful cut-off line
• Bi-LED projector with integrated low and high beam
• 60W low beam / 70W high beam
• 5500K pure white colour output
• Built-in driver system for 12V operation
• RHD cut-off for UK right-hand-drive vehicles
• G5 bracket compatibility for retrofit mounting
• Double cooling fan for stable thermal performance
• Supplied as a pair (2 projectors)

Professional installation is recommended to ensure correct mounting, beam alignment, sealing, and wiring.

Technology highlights

The M4 Max Pro uses a dual reflector bowl and clear glass lens to produce a focused beam pattern with a clean cut-off. NHK’s integrated driver system and twin-fan cooling design help maintain stable light output even under harder operating conditions.

• Clear glass lens: used for maximum light transmission and a sharper beam edge
• Dual reflector bowl: designed to improve beam focus and output control
• Integrated driver: built into the projector for simpler installation
• Double cooling fan: helps maintain consistent performance and output stability

Beam performance

The NHK M4 Max Pro is designed to deliver a strong, controlled beam pattern for retrofit headlight builds.

• Low beam: 60W output with clear cut-off and accurate focus point
• High beam: 70W output with long-range spotlight effect and accurate beam focus
• RHD cut-off line: designed to reduce glare to oncoming traffic
• Luminous flux: approx. 4800 lux low beam / 6300 lux high beam

This gives the M4 Max Pro a well-balanced combination of strong foreground illumination, focused distance reach, and a safer cut-off line for UK road use.

Beam patterns (indoor & outdoor)

Indoor - Low Beam

Click to enlarge

Indoor - High Beam

Click to enlarge

Outdoor - Low Beam

Click to enlarge

Outdoor - High Beam

Click to enlarge

Product images

Front product view

Click to enlarge

Dimensions view

Click to enlarge

Angled product view

Click to enlarge

Side profile

Click to enlarge

Top angle detail

Click to enlarge

Rear cooling view

Click to enlarge

Detail view

Click to enlarge

Close-up lens detail

Click to enlarge

Frequently Asked Questions

Technical specifications

Please ensure fitment is checked carefully before purchase and consult a professional installer before fitting.

Installation

The NHK M4 Max Pro uses the same installation bracket pattern as Hella G3 / G5 projector lenses, making it suitable for many retrofit projector conversions. The built-in driver simplifies wiring by allowing direct 12V connection to the original headlight circuit.

As retrofit fitment can vary between headlamp housings, professional installation is strongly recommended for correct alignment, safe wiring, and proper sealing.