Vauxhall Opel Mokka X 7PU7-7L5F G1U0DTER03 LED DRL Indicator Modules LH + RH Pair

7PU7-7L5F G1U0DTER03 LED DRL & Indicator Modules for Vauxhall Opel Mokka X – LH + RH Pair

Complete replacement 7PU7-7L5F / G1U0DTER03 LED DRL and indicator control module pair for compatible Vauxhall and Opel Mokka X headlamps.

This set includes one left-hand (LH) module and one right-hand (RH) module, designed to restore the headlamp's LED daytime running light (DRL) and front indicator / turn signal functions where the original LED control boards have failed.

Both modules carry the board identification G1U0DTER03. The LH module carries PCB reference 00168266, while the RH module carries PCB reference 00168267.

Product Specifications

Check Your Original Modules

For the most reliable identification, compare both replacement modules with the original LED boards fitted inside your headlamps.

Before ordering, compare the part number, LH / RH markings, PCB shapes, electrical connectors and mounting positions with your existing modules.

DRL & Indicator Control

The G1U0DTER03 boards form part of the headlamp LED lighting system and control the corresponding daytime running light and indicator / turn signal functions.

Possible Symptoms of Failed Modules

• Left or right daytime running light not operating
• Left or right front indicator not operating correctly
• Intermittent DRL or indicator operation
• LED lighting operating differently between the two headlamps
• DRL or indicator faults isolated to one or both headlamps

These symptoms can also be caused by wiring, connectors, power supply, water ingress or other headlamp components. Correct diagnosis is recommended before replacing the LED modules.

Vehicle Compatibility

*Headlamp specifications can vary within the same vehicle model and production year. Always identify both original modules before ordering.

Approximate Dimensions

Measurements are approximate and apply to each module. They should not be used as the sole method of identifying the correct replacement parts.

Direct Replacement Design

Designed as replacements for the corresponding left-hand and right-hand LED circuit boards, allowing the existing headlamp assemblies to be retained where the LED modules themselves have been diagnosed as faulty.

• Includes specific LH / left-hand and RH / right-hand board configurations
• Integrated electrical connectors
• Matching replacement PCB profiles
• Correct mounting layouts for compatible headlamps
• Controls both DRL and indicator LED functions
• 12V DC automotive application
• Replacement modules supplied ready for installation

Electrical Connector

Each module incorporates the electrical connector directly into the circuit board. For correct fitment, carefully compare the connector shape, pin layout, orientation and mounting position with the original modules before ordering.

Each connector has four electrical terminals in total: two small metal terminals within the upper elongated connector section and two small metal terminals within the lower section, matching the 2 + 2 pin layout shown in the product photographs.

What's Included?

Modules are supplied as pictured. No retail box, fitting hardware or instruction manual is included.

Only Need One Side?

HIDS-DIRECT also supplies both modules separately:

Installation

Installation requires access to the headlamp's internal LED electronics. Professional installation is recommended if you are unfamiliar with automotive headlamp electrical repairs.

Before installation, ensure that the vehicle's electrical supply is safely isolated and inspect both headlamps, electrical connectors and original boards for signs of water ingress, corrosion, overheating or wiring damage.

The replacement modules should only be fitted once the original LED boards have been correctly identified as the cause of the lighting fault.

Repair the Headlamps – Not the Complete Units

Where the internal LED boards have been confirmed as the cause of the fault, replacing the individual 7PU7-7L5F / G1U0DTER03 modules can provide a practical repair solution without replacing the complete headlamp assemblies.

Frequently Asked Questions