Loading... Please wait...Sign up for our newsletter and receive updates and special offers!
Sorry but this item is currently unavailable.
Please check back at a later stage.
Replacement 7PU7-7L5F / G1U0DTER03 LED DRL and indicator control module for the right-hand (RH) headlamp fitted to compatible Vauxhall and Opel Mokka X vehicles.
This replacement LED circuit board is designed to restore the headlamp's LED daytime running light (DRL) and front indicator / turn signal functions where the original module has failed.
The module is clearly marked RH for the right-hand side and carries the board identification G1U0DTER03 together with PCB reference 00168267.
For the most reliable identification, compare this replacement module with the original LED board fitted inside your headlamp.
Before ordering, compare the part number, RH marking, PCB shape, electrical connector and mounting positions with your existing module.
The G1U0DTER03 board forms part of the headlamp's LED lighting system and controls the corresponding daytime running light and indicator / turn signal functions.
These symptoms can also be caused by wiring, connectors, power supply, water ingress or other headlamp components. Correct diagnosis is recommended before replacing the LED module.
| Make | Model | Approx. Years | Position | Function |
|---|---|---|---|---|
| Vauxhall | Mokka X | 2016–2019* | Front Right / RH | LED DRL / Indicator |
| Opel | Mokka X | 2016–2019* | Front Right / RH | LED DRL / Indicator |
*Headlamp specifications can vary within the same vehicle model and production year. Always identify your original module before ordering.
Measurements are approximate and should not be used as the sole method of identifying the correct replacement module.
Designed as a replacement for the corresponding right-hand LED circuit board, allowing the existing headlamp assembly to be retained where the LED module itself has been diagnosed as faulty.
The module incorporates the electrical connector directly into the circuit board. For correct fitment, carefully compare the connector shape, pin layout, orientation and mounting position with the original module before ordering.
The connector has four electrical terminals in total: two small metal terminals within the upper elongated connector section and two small metal terminals within the lower section, matching the 2 + 2 pin layout shown in the product photographs.
HIDS-DIRECT also supplies the corresponding LH / left-hand 7PU7-7L5F G1U0DTER03 LED DRL & Indicator Module or the complete LH + RH module pair .
If both headlamp modules require replacement, the LH + RH pair provides both matching modules in one package.
Installation requires access to the headlamp's internal LED electronics. Professional installation is recommended if you are unfamiliar with automotive headlamp electrical repairs.
Before installation, ensure that the vehicle's electrical supply is safely isolated and inspect the headlamp, electrical connector and original board for signs of water ingress, corrosion, overheating or wiring damage.
The replacement module should only be fitted once the original LED board has been correctly identified as the cause of the lighting fault.
Where the internal LED board has been confirmed as the cause of the fault, replacing the individual 7PU7-7L5F / G1U0DTER03 module can provide a practical repair solution without replacing the complete headlamp assembly.
Match these references together with the PCB shape, 4-pin 2 + 2 connector and mounting positions shown in our photographs.
UK specialists in HID Xenon and LED automotive lighting, including replacement headlight control modules, LED drivers, ballasts, igniters and automotive lighting electronics.
The RH module is identified using manufacturer reference 7PU7-7L5F. The replacement LED board also carries G1U0DTER03 and PCB reference 00168267.
The module forms part of the headlamp LED system and controls the daytime running light (DRL) and front indicator / turn signal functions.
This listing is specifically for the RH / right-hand / front-right module. The PCB itself is marked RH.
It is designed for compatible Vauxhall and Opel Mokka X headlamps, approximately model years 2016–2019. Headlamp specifications can vary, so the original module should always be checked before ordering.
The connector has 4 electrical pins in total, arranged as 2 pins in the upper connector section and 2 pins in the lower section. Compare the connector with the detailed product photographs before ordering.
The module is designed for a 12V DC automotive electrical system.
The module measures approximately 50 mm × 40 mm × 15 mm (length × width × height), with the height measured at the connector.
Yes. HIDS-DIRECT also supplies the corresponding LH / left-hand 7PU7-7L5F G1U0DTER03 module , or the complete LH + RH module pair .
If diagnosis confirms that this LED control board is responsible for the fault, the individual module can be replaced rather than purchasing an entire headlamp assembly.
All prices are in JPY © 2026 HIDS DIRECT Store. All rights Reserved | Sitemap
hids-direct.co.uk, Car Part Hut Ltd, UK Registered 13039569 VAT Number GB 365025020
Registered office 140 LEE LANE BL6 7AF HORWICH GB